Reasonable price for Micro Bearing Mr1126 - NU NJ NUP 400 series Cylindrical roller bearing – MJE

Short Description:

Introduction: Cylindrical roller bearing have two integral flanges on either the inner or outer ring to guide the rollers, the bearings have open flanges.The inward face of the flange is inclined a defined angle, the flange design, together with the roller end design and surface finish promote the formation of a lubricant film to reduce friction and frictional heat. The bearing ring with the roller and cage assembly can be separated from the other ring, this simplifies mounting and dis-mounti...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for Bearing 6205 C3, Rollerblading Bearing, Factory Supply Ball Bearing 6210zz, First business, we learn each other. Further business, the trust is getting there. Our company always at your service at any time.

Reasonable price for Micro Bearing Mr1126 - NU NJ NUP 400 series Cylindrical roller bearing – MJE Detail:

Introduction:

Cylindrical roller bearing have two integral flanges on either the inner or outer ring to guide the rollers, the bearings have open flanges.The inward face of the flange is inclined a defined angle, the flange design, together with the roller end design and surface finish promote the formation of a lubricant film to reduce friction and frictional heat.

The bearing ring with the roller and cage assembly can be separated from the other ring, this simplifies mounting and dis-mounting, particularly when load conditions require both rings to have an interference fit.

Cylindrical roller bearing are available in several designs, the main difference is the configuration of the flanges.

Feature:

MJE bearing are with advanced technological process, the convexity raceway,the appearance of line,high precision reserves and longer service life. We have EM type solid brass cage (GERMANY process reinforced rivets),E type combination retainer,steel stamping cage,TN type, NU type, N type, NUP type and NJ type.

NU TYPE:

NU design bearings have integral flanges on the outer ring and no flanges on the inner ring.These bearings can accommodate axial displacement of the shaft relative to the housing in both directions.

N TYPE:

N design bearings have integral flanges on the inner ring and no flanges on the outer ring.These bearings can accommodate axial displacement of the shaft relative to the housing in both directions.

NJ TYPE:

NJ design bearings have integral flanges on the outer and one other inner ring.

These bearings are used to locate the shaft axially in one direction.

NUP TYPE:

NUP design bearings have two integral flanges on the outer ring and one integral flange and one non-integral flange i.e a loose flange ring on the inner ring. These bearings are used to locate the shaft axially in both directions.

Non-locating bearings:

Cylindrical roller bearings of N design and NU design are non-locating bearings and they can only support radial forces.

Semi-locating bearing:

Cylindrical roller bearings of NJ design are semi-locating bearings.They can support not only high radial forces but also axial forces.Thus,it can locate the shafts in one direction.They act as non-locating bearing in the opposite direction.

Locating bearings:

Cylindrical roller bearings NUP design are locating bearings. They can support axial forces from both directions as well as radial forces, so it can locate shafts in two directions.

Additional codes:

Suffix	Description
C3	Radial internal clearance greater than Normal
C4	Radial internal clearance greater C3
C5	Radial internal clearance greater C4
E,EC	Reinforced design
M	Solid brass cage,roller centered
J	Stamped steel cage,roller centered
P	Glass fiber reinforced PA66 cage, roller centered
N	Snap ring groove in the outer ring
N1	One locating slot in one outer ring side face
N2	Two locating slot in one outer ring side face 180 degree
S1	Bearing ring heat stabilized for operation temperature <=200degree centigrade
S2	Bearing ring heat stabilized for operation temperature <=250degree centigrade
VL0241	Outer ring outer surface coated with alumina, insulating capacity is up to 1000V DC
VL2071	Inner ring outer surface coated with alumina, insulating capacity is up to 1001V DC

Product detail pictures:

The purchaser fulfillment is our primary focus on. We uphold a consistent level of professionalism, high quality, credibility and service for Reasonable price for Micro Bearing Mr1126 - NU NJ NUP 400 series Cylindrical roller bearing – MJE, The product will supply to all over the world, such as: Afghanistan, Cannes, Madagascar, The credibility is the priority, and the service is the vitality. We promise we have now the ability to offer excellent quality and reasonable price items for customers. With us, your safety is guaranteed.

7014ctynsulp4