OEM Manufacturer Gimbal Bracket - AH32 series Withdrawal sleeve – MJE Detail:
Introduction:
MJE withdrawal sleeve can be used on mount bearing with a tapered bore on cylindrical seats of stepped shafts.The sleeve is located on the shaft by a nut or an end plate.
To secure the bearing to the shaft,usually press the withdrawal sleeve into the bearing bore.In order to do this better,particularly where larger bearings are concerned,considerable force is required to overcome the friction between the mating surface of the bearing and sleeve.Mounting and dismounting of bearings on withdrawal sleeves can be facilitated considerably by using a hydraulic nut.
The withdrawal sleeve is installed at bearing end to disassemble.For the conic apertures bearing, it is very easy to install,disassemble and repair. It is widely used in the machinery equipment of light industry,metal rolling mill,etc.
Additional modes:
Suffix | Description |
H | Code of type for adapter sleeve |
A | Code of type for adapter sleeve |
AH | Code for adapter sleeve with taper core 1:12 |
AH2 | Code for adapter sleeve with taper core 1:30 |
AHX | Code for adapter sleeve with taper core 1:12 and different size of screw thread |
KM | Lock nut code with 4 groove |
HM | Lock nut code with 8 groove |
MB | Lock washer code |
MS | Lock code |
Product detail pictures:
Related Product Guide:
What Is a Deep Groove Ball Bearing?
How Ball and Roller Bearings Work
We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our management ideal for OEM Manufacturer Gimbal Bracket - AH32 series Withdrawal sleeve – MJE, The product will supply to all over the world, such as: Kuwait, azerbaijan, Netherlands, We are in continuous service to our growing local and international clients. We aim to be worldwide leader in this industry and with this mind; it is our great pleasure to serve and bringing the highest satisfaction rates among the growing market.
By Lilith from Qatar - 2015.06.03 10:17
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
By Iris from Oman - 2016.10.23 10:29