High Performance Fag Nj2318 Bearing - AH30 series Withdrawal sleeve – MJE Detail:
Introduction:
MJE withdrawal sleeve can be used on mount bearing with a tapered bore on cylindrical seats of stepped shafts.The sleeve is located on the shaft by a nut or an end plate.
To secure the bearing to the shaft,usually press the withdrawal sleeve into the bearing bore.In order to do this better,particularly where larger bearings are concerned,considerable force is required to overcome the friction between the mating surface of the bearing and sleeve.Mounting and dismounting of bearings on withdrawal sleeves can be facilitated considerably by using a hydraulic nut.
The withdrawal sleeve is installed at bearing end to disassemble.For the conic apertures bearing, it is very easy to install,disassemble and repair. It is widely used in the machinery equipment of light industry,metal rolling mill,etc.
Additional modes:
Suffix | Description |
H | Code of type for adapter sleeve |
A | Code of type for adapter sleeve |
AH | Code for adapter sleeve with taper core 1:12 |
AH2 | Code for adapter sleeve with taper core 1:30 |
AHX | Code for adapter sleeve with taper core 1:12 and different size of screw thread |
KM | Lock nut code with 4 groove |
HM | Lock nut code with 8 groove |
MB | Lock washer code |
MS | Lock code |
Product detail pictures:
Related Product Guide:
How a Roller Bearing Works
Deep Groove Ball Bearing Advantages
We will constantly satisfy our respected customers with our good excellent, superior value and superior assistance due to we're additional experienced and far more hard-working and do it in cost-effective way for High Performance Fag Nj2318 Bearing - AH30 series Withdrawal sleeve – MJE, The product will supply to all over the world, such as: Johannesburg, El Salvador, kazakhstan, If you need any of our products, or have other items to be produced, please send us your inquiries, samples or detailed drawings. Meanwhile, aiming to develop into an international enterprise group, we look forward to receiving offers for joint ventures and other cooperative projects.
By Annie from Angola - 2015.05.15 10:52
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Wendy from Monaco - 2016.06.25 12:48