Discount Price Bearing Ucf313 - 6200 series deep groove ball bearing – MJE

Short Description:

Introduction: Deep groove ball bearing are particularly versatile. They are simple in design,non-separable,suitable for high speeds and are robust in operation,requiring little maintenance. MJE deep groove ball have deep,uninterrupted raceway grooves.These raceway grooves have a close osculation with the balls,enabling the bearing to accommodate radial loads and axial loads in both directions. Feature: MJE Deep groove ball bearing are characterized by the following : A:Optimized internal geom...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

Our concentrate on should be to consolidate and enhance the quality and service of present products, meanwhile consistently produce new products to meet unique customers' demands for 6000 Series Ball Bearing, Standard Ball Bearing, Thrust Roller Bearing, If needed, welcome to help make speak to with us by our web page or cellular phone consultation, we are going to be delighted to serve you.

Discount Price Bearing Ucf313 - 6200 series deep groove ball bearing – MJE Detail:

Introduction:

Deep groove ball bearing are particularly versatile. They are simple in design,non-separable,suitable for high speeds and are robust in operation,requiring little maintenance. MJE deep groove ball have deep,uninterrupted raceway grooves.These raceway grooves have a close osculation with the balls,enabling the bearing to accommodate radial loads and axial loads in both directions.

Feature:

MJE Deep groove ball bearing are characterized by the following :

A:Optimized internal geometry B:Better ball quality

C:Noise-free D:Reduced vibration

E:Improved sealing F:Longer service life

Standard design variant:

MJE single row deep groove ball bearing design can be divided into open and sealed.

Open bearing is suitable for high speed and ultra-high speed operation condition. Suffix 2Z means both sides are gap seal,suitable for high speed running condition.Suffix 2RS,2RZ means both sides lip seal,using rubber NBR seals,suitable for medium speed.

Lubrication:

The open type for single row deep groove ball bearing is lubricated by grease or oil lubrication.Deep groove ball bearing whose both sides with gap seal or lip seal be filled with high quality oil, using for lifetime.

MJE deep groove ball bearing have an optimized surface finish on all contact surfaces to maximized the effects of the lubricant. This allows the bearing to run cooler and last longer.

Matched bearing:

For single bearing with insufficient capacity, or shaft axial clearance must be given as a two-way axial positioning. MJE can supply matched single row deep groove ball bearings. According to different demand,matched bearing can be divided into different configuration,such as series connection, face to face and back to back. To install the bearings in case of each other to be closed,load will be distributed between bearings and no need to use gaskets or other similar devices.

Additional codes:

Suffix	Description
C2	Radial internal clearance smaller than Normal
C3	Radial internal clearance greater than Normal
C4	Radial internal clearance greater C3
C5	Radial internal clearance greater C4
DB	Two bearings matched for mounting back to back
DF	Two bearings matched for mounting face to face
DT	Two bearings matched for mounting tandem
J	Stamped steel cage
M	Machined brass cage
E	Reinforced ball set
GJN	Polyurea grease ,NLGI consistency class 2,temperature range:-30–+150 degree centigrade
HT	Polyurea grease ,NLGI consistency class 2,temperature range:-40–+150 degree centigrade
LHT23	Polyurea grease ,NLGI consistency class 2,temperature range:-50–+150 degree centigrade
N	Snap ring groove in the outer ring
NR	Snap ring groove in the outer ring with appropriate snap ring
RS/2RS	Contact seal,NBR on one or both sides
RZ/2RZ	Non-contact seal,NBR on one or both sides
Z/2Z	Stamped steel shield on one or both sides
TN9	Glass fiber reinforced PA66 cage, ball centered
VL0241	Outer ring outer surface coated with alumina, insulating capacity is up to 1000V DC
VL2071	Inner ring outer surface coated with alumina, insulating capacity is up to 1001V DC

Product detail pictures:

We will make just about every exertion for being excellent and perfect, and speed up our actions for standing during the rank of worldwide top-grade and high-tech enterprises for Discount Price Bearing Ucf313 - 6200 series deep groove ball bearing – MJE, The product will supply to all over the world, such as: Costa Rica, United States, Saudi Arabia, we rely on own advantages to build a mutual-benefit commerce mechanism with our cooperative partners. As a result, now we have gained a global sales network reaching the Middle East, Turkey, Malaysia and Vietnamese.

6205 Bearing