18 Years Factory Ball Bearing 623zz - AH31 series Withdrawal sleeve – MJE Detail:
Introduction:
MJE withdrawal sleeve can be used on mount bearing with a tapered bore on cylindrical seats of stepped shafts.The sleeve is located on the shaft by a nut or an end plate.
To secure the bearing to the shaft,usually press the withdrawal sleeve into the bearing bore.In order to do this better,particularly where larger bearings are concerned,considerable force is required to overcome the friction between the mating surface of the bearing and sleeve.Mounting and dismounting of bearings on withdrawal sleeves can be facilitated considerably by using a hydraulic nut.
The withdrawal sleeve is installed at bearing end to disassemble.For the conic apertures bearing, it is very easy to install,disassemble and repair. It is widely used in the machinery equipment of light industry,metal rolling mill,etc.
Additional modes:
Suffix | Description |
H | Code of type for adapter sleeve |
A | Code of type for adapter sleeve |
AH | Code for adapter sleeve with taper core 1:12 |
AH2 | Code for adapter sleeve with taper core 1:30 |
AHX | Code for adapter sleeve with taper core 1:12 and different size of screw thread |
KM | Lock nut code with 4 groove |
HM | Lock nut code with 8 groove |
MB | Lock washer code |
MS | Lock code |
Product detail pictures:
Related Product Guide:
How a Roller Bearing Works
What Is a Deep Groove Ball Bearing?
Our firm sticks to the basic principle of "Quality is the life of your company, and status will be the soul of it" for 18 Years Factory Ball Bearing 623zz - AH31 series Withdrawal sleeve – MJE, The product will supply to all over the world, such as: Philippines, Guinea, Singapore, We've got constantly insisted on the evolution of solutions, spent good funds and human resource in technological upgrading, and facilitate production improvement, meeting the wants of prospects from all countries and regions.
By Alexia from Grenada - 2015.02.04 14:13
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Gill from Irish - 2015.09.12 17:18