AH23 series Withdrawal sleeve

Short Description:

Introduction: MJE withdrawal sleeve can be used on mount bearing with a tapered bore on cylindrical seats of stepped shafts.The sleeve is located on the shaft by a nut or an end plate. To secure the bearing to the shaft,usually press the withdrawal sleeve into the bearing bore.In order to do this better,particularly where larger bearings are concerned,considerable force is required to overcome the friction between the mating surface of the bearing and sleeve.Mounting and dismounting of bearin...

FOB Price: US $0.5 - 9,999 / Piece

Min.Order Quantity: 100 Piece/Pieces

Supply Ability: 10000 Piece/Pieces per Month

Port: Shenzhen

Payment Terms: L/C,D/A,D/P,T/T

Send email to us Download as PDF

Product Detail

product model

Product Tags

Introduction:

MJE withdrawal sleeve can be used on mount bearing with a tapered bore on cylindrical seats of stepped shafts.The sleeve is located on the shaft by a nut or an end plate.

To secure the bearing to the shaft,usually press the withdrawal sleeve into the bearing bore.In order to do this better,particularly where larger bearings are concerned,considerable force is required to overcome the friction between the mating surface of the bearing and sleeve.Mounting and dismounting of bearings on withdrawal sleeves can be facilitated considerably by using a hydraulic nut.

The withdrawal sleeve is installed at bearing end to disassemble.For the conic apertures bearing, it is very easy to install,disassemble and repair. It is widely used in the machinery equipment of light industry,metal rolling mill,etc.

Additional modes:

Suffix	Description
H	Code of type for adapter sleeve
A	Code of type for adapter sleeve
AH	Code for adapter sleeve with taper core 1:12
AH2	Code for adapter sleeve with taper core 1:30
AHX	Code for adapter sleeve with taper core 1:12 and different size of screw thread
KM	Lock nut code with 4 groove
HM	Lock nut code with 8 groove
MB	Lock washer code
MS	Lock code

Previous: AH3 series Withdrawal sleeve

Next: AH30 series Withdrawal sleeve

Item No.	Dimension				Lock nut	Appropriate bearings	Wegiht
Model	d	d1	B1	G	Lock nut	Models	KG
AH2308	40	35	40	M45*1.5	KM09	2308K,22308K	0.15
AH2309	45	40	44	M50*1.5	KM10	2309K,22309K	0.16
AH2310	50	45	50	M55*2	KM11	2310K,22310K	0.19
AH2311	55	50	54	M60*2	KM12	2311K,22311K	0.28
AH2312	60	55	58	M65*2	KM13	2312K,22312K	0.31
AH2317	85	80	74	M95*2	KM19	2317K,22317K	0.72
AH2318	90	85	79	M100*2	KM20	2318K,22318K	0.80
AH2319	95	90	85	M105*2	KM21	2319K,22319K	0.90
AH2320	100	95	90	M110*2	KM22	2320K,22320K	1.10
AH2340	200	190	170	Tr220*4	HM44	22340K	7.80
AH2344	220	200	181	Tr240*4	HM48	22344K	13.8
AH2348	240	220	189	Tr260*4	HM52	22348K	14.2