23100 series spherical roller bearing

Short Description:

Introduction: Spherical roller bearings have two rows of rollers with one common spherical raceway in the outer ring and two inner ring raceways inclined at an angle to the bearing axis.The self-aligning spherical roller bearing can accommodate both radial and thrust loads and is designed to operate even if the shaft and housing become misaligned under load. This type of bearing is the favoured choice when operating conditions include heavy loads plus difficulties in establishing or maintaini...


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Port: Shenzhen
  • Payment Terms: L/C,D/A,D/P,T/T
  • Product Detail

    product model

    Product Tags

    Introduction:

    Spherical roller bearings have two rows of rollers with one common spherical raceway in the outer ring and two inner ring raceways inclined at an angle to the bearing axis.The self-aligning spherical roller bearing can accommodate both radial and thrust loads and is designed to operate even if the shaft and housing become misaligned under load. This type of bearing is the favoured choice when operating conditions include heavy loads plus difficulties in establishing or maintaining shaft alignment relative to the bearing housing.

    Design features:

    MJE spherical roller bearing have different designs for the inner ring and cage.

    CA TYPE: These bearing feature based on one piece precision-machined brass cage and symmetric rollers.The designs are optimized to offer considerable higher load ratings than conventional designs for a broad range of applications and long service life.

    CC TYPE: These bearings feature based on two window-type steel cage and symmetric rollers. There is a flangeless inner ring with a guide ring centered on the inner ring.

    MB TYPE: These bearings feature based on two piece precision-machined brass cage being an improvement over the conventional design. These bearings incorporate symmetrical rollers and are equivalent to CC design in load capacity.

    E TYPE: These bearings consist of symmetric rollers,floating guide ring through the double row roller, inner ring without rib, two sheet steel cages. Dynamic load rating average prolonged 25%-35%. Thus, at the same condition, the rating life of E type bearing is about 2-3 times than old design.

    Radial and axial load capacity:

    Spherical roller bearing can support axial forces in both directions and high radial forces.They are designed for very high load carrying capacity and suitable for the heaviest loads.

    Cylindrical bore bearing:

    All series of spherical roller bearings have a cylindrical bore design.

    Tapered bore bearing:

    Based on certain requirement, spherical roller bearing inner ring has tapered bore design, and the bearing suffix K indicates bore taper 1:12 .

    Lubrication groove and lubrication hole:

    To facilitate and easily lubricated, MJE spherical roller bearing with lubrication hole and lubrication groove.

    There are one lubrication groove and three lubrication holes on the ex-circle of outer ring,the suffix is W33.

    There are thee lubrication holes on the ex-circle of outer ring, the suffix is W20.

    Operating temperature:

    The operating temperature range of spherical roller bearings with metal cage is from -30 to +200 degree centigrade.

    The working temperature of bearings with glass fiber reinforced nylon cage applicable up to +120 degree centigrade.

    Additional codes:

    Suffix Description
    C2 Radial internal clearance smaller than Normal
    C3 Radial internal clearance greater than Normal
    C4 Radial internal clearance greater C3
    C5 Radial internal clearance greater C4
    2CS Running accuracy to P5 tolerance class
    2CS2 Contact seal ,FKM on both sides
    2CS5 Contact seal ,HNBR on both sides
    HA3 Case-hardened inner ring
    K Tapered bore,taper 1:12
    K30 Tapered bore,taper 1:30
    P5 Dimension and running accuracy to P5 tolerance class
    P6 Dimension and running accuracy to P6 tolerance class
    VA405 Bearing for vibratory applications,surface-hardened stamped steel cage
    VA406 Same as VA405,but PTFE coated cylindrical inner ring bore
    VG114 Surface-hardened stamped steel cage
    VT143 Filled to 25-45% with LGEP 2 grease
    W Without annular groove and lubrication holes in the outer ring
    W20 Three lubrication holes in the outer ring
    W26 Six lubrication holes in the inner ring
    W33 Annular groove and three lubrication holes in the outer ring
    W33X Annular groove and six lubrication holes in the outer ring
    W64 Solid oil
    W77 Same as W33 ,but lubrication holes with plugs
    235220 Case-hardened inner ring with a helical groove in the bore

  • Previous:
  • Next:

  • Bearing No. Shape Dimension(mm) Load Rating(KN) Max Speed(rpm) Weight
    Model d D B Cr Cor Grease Oil KG
    23120 100 165 52 330 520 1800 2200 5.05
    23121 105 175 56 249 494 1600 1900 6.25
    23122 110 180 56 386 613 1500 1800 7.23
    23124 120 200 62 463 736 1200 1500 7.62
    23126 130 210 64 492 812 1300 1700 8.62
    23128 140 225 68 561 953 1000 1400 10.85
    23130 150 250 80 747 1267 900 1200 17
    23132 160 270 56 870 1460 800 1200 19.45
    23134 170 280 88 911 1565 900 1200 21.05
    23136 180 300 96 1060 1850 750 900 26.9
    23138 190 320 104 1200 2120 650 950 34.9
    23140 200 340 112 1420 2530 630 800 50.9
    23144 220 370 120 1610 2900 600 800 54.1
    23148 240 400 128 1840 3310 500 650 54.9
  • RELATED PRODUCTS

    WhatsApp Online Chat !